Plastic

Engineering plastics

PP-H (Polypropylene Homopolymer)

Wide range of applications due to low price, high chemical resistance, high hardness and stiffness, medical harmlesness and excellent weldability. The material is suitable for the production of water tanks, but also for various chemicals. Due to the low price, the material can also be used on different pads and covers.

PP-C (Polypropylene carbonate)

The use of PP-C material is very similar to the use of PP-H material. The main difference is at the application temperature as the PP-C does not bend below 0 ° C and the material can be used and loaded up to -30 ° C. PP-C material is most used to build tanks and pools.

PE300/PE-HD (High-density polyethylene)

Thanks to UV stabilization in basic design in black, high chemical resistance and excellent weldability, the material has a wide range of uses. The material is ideal for the construction of outdoor tanks, pools, outdoor partitions, washers and others. Other features include excellent electroinsulating properties and medical harmlesness.

PVC-U (Polyvinyl chloride unplasticized)

The main features of PVC-U include high hardness, stiffness, weldability, bonding, machining, high resistance to some chemicals. The scope of use of PVC is very wide from the construction industry, the production of tanks and pipelines for drinking water and into the chemical industry, modeling and others.

Type		Product	Color	Dimension
Engineering Plastics	Polypropylene PP-H PP-C PP AST PP EL PPs PP med PP SK/GK PP Foam PP GF30	Sheets Extruded Comp. Mouled	Grey Natural Black White Blue	1000×2000 mm 1500×3000 mm 1500×4000 mm 2000×4000 mm 2000×6000 mm Extruded 1 – 50 mm Comp. Moulded 8 – 200 mm
		Round Bars Extruded	Natural Grey	8 – 700 mm
		Tubes Profiles Welding Wire
	High Density Polyetylene PE 300 PE 300 SK/GK PE 300 AST PE 300 EL PE 300 Vacuum form	Sheets Extruded Comp. Mouled	Grey Natural Black White Blue	1000×2000 mm 1500×3000 mm 1500×4000 mm 2000×4000 mm 2000×6000 mm Extruded 1 – 50 mm Comp. Moulded 8 – 200 mm
		Round Bars Extruded	Natural Grey	8-700 mm
		Tubes Profiles Welding Wire

* Material cutting to size, offer complete production of parts based on drawings, recommendations suitable material. Other materials on request.

Type		Product	Color	Dimension
Engineering Plastics	Polyvinyl Chloride PVC-U PVC-P PVCc/PVC-C PVC Foam	Sheets Extruded Comp. Mouled	Grey Natural Black White Blue	1000×2000 mm 1220×2440 mm 1500×3000 mm 1500×4000 mm Extruded 1 – 50 mm
		Round Bars Extruded	Grey Black	3 – 400 mm
		Tubes Profiles Welding Wire

* Material cutting to size, offer complete production of parts based on drawings, recommendations suitable material. Other materials on request.

PE500/PE-HMW (high density polyethylene)

Material used mainly in engineering and food industry due to good abrasion resistance, easy machining and excellent impact resistance. Thanks to its excellent mechanical properties and perfect shock resistance, the material is ideal for cutting and cutting pads and worktops. The material is suitable for direct contact with food.

PE1000/PE-UHMW (Ultra-high-molecular-weight polyethylene)

Material used mainly in engineering, thanks to excellent abrasion resistance, easy machining and excellent sliding properties. Thanks to these features, the material is ideally suited for the production of sliding bars, worktops and various parts where a low coefficient of friction is required. The material is suitable for direct contact with food.

Type		Product	Color	Dimension
Engineering Plastics	High-molecular Weight Polyethylene (PE-500 / PE-HMW) PE 500 PE 500 R PE 500 AST PE 500 EL PE 500 Microblock PE 500 Nuclear	Sheets Extruded Comp. Mouled	Natural Black Green	1000×2000 mm 1250×3000 mm 2000×4000 mm Extruded 1 – 15 mm Comp. Moulded 8 – 200 mm
	Ultra-high-molecular Weight Polyethylene (PE-1000 / PE-UHMW) PE 1000 PE 1000 R PE 1000 AST PE 1000 EL PE 1000 Slide PE 1000 Microblock PE 1000 Flametech MATROX	Sheets Skived Comp. Mouled	Natural Black Green Blue	1000×2000 mm 1250×3000 mm 2000×6000 mm 2500×6000 mm Comp. Moulded 8 – 200 mm Skived 1 – 8 mm
		Round Bars Extruded	Natural Black Green Blue	8-700 mm
		Profiles

* Material cutting to size, offer complete production of parts based on drawings, recommendations suitable material. Other materials on request.

PA 6 (polyamid)

The main features of the polyamide include high strength and stiffness, good abrasion resistance, low friction coefficient and good mechanical machining. Polyamide is most used for the production of gears, bearings, pulleys and various machine components. PA 6 has good chemical resistance to hydrocarbons, fats, oils and other organic compounds. The drawback is the absorption of the material, approximately 1.5 to 3%. It is a very widespread material that is most used for the production of machine parts such as pulleys, gears, housings, guiding and damping elements and many other parts.

PA 66 (polyamid)

Polyamide 66 is characterized by increased mechanical stiffness and strength over a wide temperature range, shock resistance, perfect sliding properties, perfect machinability, good weldability, good material for contact with food, good electro insulating properties and good adhesion properties. PA 66 has good chemical resistance to hydrocarbons, fats, oils and other organic compounds. The disadvantage is the absorption of the material up to 2.7%. PA 66 is most used for the production of machine parts such as pulleys, gears, housings, guide and damping elements, spatula and many other parts.

POM (polyoxymetylen, polyacetal)

Features very similar to PA 6, high hardness, strength, excellent abrasion resistance, low friction coefficient, lightweight machining, good chemical resistance but minimally absorbent (0.1-0.2%). Perfect shock toughness up to -40 ° C. Thanks to its perfect dimensional stability, this material is ideal for producing gears, small precision parts, pulleys, bearings and components for most components.

PET (Polyethylene terephthalate)

Polyethylene terephthalate of the polyester family is characterized by excellent dimensional stability (better than PA and POM), extremely high strength and hardness. The material has good sliding properties, good abrasion resistance, perfect machinability, weldability and very low water absorption. PET is suitable for use in the food and chemical industry.

Type		Product	Color	Dimension
Engineering Plastics	Polyamide (PA) PA 6 G PA 6 E PA 6 MoS2 PA 6 + Solid lub. PA 6 + Oil PA 6 GF30 PA 6 Detectable v. PA 6 FR PA 6 ESD PA 66 PA 66 MoS2 PA 66 + Solid lub. PA 66 Heat stabilized PA 66 GF30 PA 66 CF20 PA 12 PA 11 PA 46 PA 12 Transparent	Sheets Coils Extruded Cast	Natural Black	1000×2000 mm 1250×2500 mm 620×2000 mm 620×3000 mm 1000×1000 mm Extruded 0,2 – 120 mm Cast 6 – 500 mm
		Round Bars Extruded Cast	Natural Black	8 – 700 mm
		Tubes Extruded Cast	Natural	16×3 – 600×50 mm
	Polyoxymethylen / Polyacetal POM-C POM-H POM-C MG (colored) POM-C + Solid Lub. POM-C ESD POM-C EL POM-C GF25 POM-C Medical Tech. POM-C Detectable	Sheets Coils Extruded	Natural Black Blue	1000×2000 mm 1250×2500 mm 620×2000 mm 620×3000 mm Extruded 0,2 – 200 mm
		Round Bars Extruded	Natural Black Blue Green Yellow Red	3-500 mm
		Tubes Extruded	Natural	20×5 – 520×87 mm

Type		Product	Color	Dimension
Engineering Plastics	Polyethylene terephthalate (Semi-crystalline) PET PET+PTFE	Sheets Extruded	Natural Black	1000×2000 mm 1250×2500 mm 620×2000 mm 620×3000 mm2 – 150 mm
		Round Bars Extruded	Natural Black	8 – 200 mm
		Tubes Extruded	Natural	16×3 – 520×87,5 mm

* Material cutting to size, offer complete production of parts based on drawings, recommendations suitable material. Other materials on request.

PTFE (teflon)

PTFE or Teflon, is characterized by excellent resistance to extreme temperatures, both extremely low and extremely high. application range -170 to + 250 ° C. Other important properties of this material include excellent chemical resistance, excellent sliding properties, excellent electro-insulating properties and excellent resistance to external influences. Teflon is often used for the production of bearings, sliding housings, piston rings, and machine parts where high temperature resistance or excellent sliding properties are required. Teflon is also often used as an additive in making other materials, thus providing even better sliding properties.

PVDF

The main features of PVDF include extreme resistance to external influences and certain chemicals such as acids, oxidants, chlorinated solvents and others. Other PVDF properties include high temperature resistance, high strength and stiffness, high impact resistance even at very low temperatures, good sliding properties and high purity (without plasticizers, sliding additives, flame retardants). Perfect weldability and good heat-forming properties. PVDF is often used for the manufacture of valves and other parts of pumps, seals, pipes and containers for various chemicals and similar applications. The material is suitable for contact with food.

PEEK

PEEK is a heavily flammable and self-extinguishing material with a short-term temperature up to 310 ° C. The main advantages of this material include excellent dimensional stability at different temperatures, high strength and hardness at high temperatures, very resistant material against low temperature impact, excellent sliding properties and abrasion resistance, good thermoforming properties, good insulation properties in high temperature range , high resistance to high energy (radiation).

PSU

Excellent dimensional stability, good transparency, highly flame-retardant and flame-retardant material that produces very small amounts of smoke in the event of combustion, high resistance to X-rays and gamma rays, high strength, stiffness and hardness over a wide temperature range, good weldability, machinability, good electrical insulation properties. The material is mostly used in health care and in the food industry.

PPSU

Excellent dimensional stability, good transparency, heavily flammable material which produces extremely small amounts of smoke in the event of burning, high X-ray and gamma radiation resistance, high strength, stiffness and hardness over a wide range of temperatures, high impact resistance even at very low temperatures, good weldability, machinability, heat forming and good electrical insulation properties. The material is mostly used in healthcare.

PEI

PEI is an unreinforced polyetherimide, suitable for contact with foods, that exhibits high mechanical strength and rigidity. The characteristic profile includes very good hydrolysis resistance, and dimensional stability, combined with a relatively high long term service temperature.

Type		Product	Color	Dimension
High-performance plastics	Polytetrafluoroethylene PTFE PTFE MoS2 PTFE GF25 PTFE CF25 PTFE Bronze PTFE Graphite	Sheets Coils Foil Moulded SKived	Natural Black	600×600 mm 1000×1000 mm 1200×1200 mm 1500×1500 mm Extruded 1 – 100 mm Skived 0,02 – 4 mm
		Round Bars Extruded	Natural	3 – 160 mm
		Tubes Extruded Moulded	Natural	40×7,5 – 1300×15 mm
	Polyvinylidene fluoride PVDF PVDF EL	Sheets Extruded	Natural	500×3000 mm 610×1000 mm 610×3000 mm 1000×1000 mm 1000×2000 mm Extruded 6 – 100 mm
		Round Bars Extruded	Natural	6 – 250 mm
		Tubes Welding Wire Extruded	Natural	16×3 – 450×20 mm 3, 4 mm
	Polyetherimide Ultem 1000 Ultem 1000 MT Ultem 2200 (GF20) Ultem 2300 (GF30)	Sheets	Natural Black	610×1220 mm Extruded 1/16”-4”
		Round Bars	Natural Black	3/16” – 8”

* Material cutting to size, offer complete production of parts based on drawings, recommendations suitable material. Other materials on request.

Type		Product	Color	Dimension
High-performance plastics	Polyetheretherketon PEEK PEEK MG (colored) PEEK MOD (PTFE+CF) PEEK GF30 PEEK CF30 PEEK Detectable	Sheets	Gray Black	500×3000 mm 620×2000 mm 620×3000 mm 1000×2000 mm5 – 150 mm
		Round Bars	Gray Black Blue Green Yellow Red	3 – 210 mm
		Tubes	Gray
	Polysulfon	Sheets	Transparent with trace of yellow	300×3000 mm 500×3000 mm 620×2000 mm 620×3000 mm6 – 100 mm
	Polysulfon	Round Bars	Transparent with trace of yellow	6 – 200 mm
	Polyphenylensulfon PPSU MG (colored)	Sheets	Transparent with trace of yellow	300×3000 mm 500×3000 mm 620×2000 mm 620×3000 mm6 – 80 mm
	Polyphenylensulfon PPSU MG (colored)	Round Bars	Transparent with trace of yellow	6 – 150 mm

* Material cutting to size, offer complete production of parts based on drawings, recommendations suitable material. Other materials on request.

PMMA (methyl methacrylate) – acrylic

Perfect light transmission (up to 92%), complete clarity, high stiffness and perfect resistance to external influences. The material can be glued, polished, bent and machined. PMMA is mainly used for roofing, advertising purposes, covers, fillers, noise barriers and other applications where there is no risk of breakage due to splinters.

PC (Polycarbonate)

Virtually unbreakable transparent material with excellent scratch resistance, half glass weight, excellent light transmission (up to 85%), good thermal and sound insulation properties, high impact strength even at very low temperatures and good dimensional stability up to 140 ° C makes this material ideal material in the building industry such as roofing, safety fillers, production of safety covers of machines, anti-noise walls. Used for CD, DVD, mobile phones and other applications. Polycarbonate can be supplied in modified versions including UV stabilization and / or in a lighter / cheaper version.

PET-G (Polyethylene terephthalate)

It is a transparent material with excellent optical properties, suitable for direct contact with food, in basic design without UV stabilization. PET-G has excellent impact strength even at very low temperatures, excellent chemical resistance, material is perfectly hot-formed, including deep drawing and without the need for pre-drying. However, it is possible to bend even the cold.

Type		Product	Color	Dimension
Transparent plastics	Polymethylmethacrylate	Sheets Extruded Cast	Transparent Opal/Opaque Blue Green Yellow Red Pink Gray Black	Extruded 2050×3050 mm 1 – 15 mm Cast 2 – 100 mm
		Round Bars Extruded Cast	Transparent	2 – 100 mm
		Tubes Square Bars Extruded Cast	Transparent	5×1 – 500×5 mm 10 – 40 mm
	Polycarbonate – solid	Sheets Extruded	Transparent Opal/Opaque Bronze Black	Extruded 2050×3050 mm 1 – 15 mm500x3000 mm 620×3000 mm 10 – 100 mm
	Polycarbonate – solid	Round Bars	Transparent Black	2 – 200 mm

* Material cutting to size, offer complete production of parts based on drawings, recommendations suitable material. Other materials on request.

Type		Product	Color	Dimension
Transparent plastics	Polyethylene Terephthalate	Sheets Extruded Cast	Transparent Opal/Opaque Bronze	Extruded 2050×3050 mm 0,8 – 15 mm

* Material cutting to size, offer complete production of parts based on drawings, recommendations suitable material. Other materials on request.

Seznam

Phone:	+420 315 817 111
Fax:	+420 315 817 130
E-mail:	office@primapol.cz

Aluminium

Stainless steel

Plastic

Aircraft materials

Fire protection

Steel

Valves & manifolds

Polish and foiling

CNC

Cutting

Plastic

PP-H (Polypropylene Homopolymer)

PP-C (Polypropylene carbonate)

PE300/PE-HD (High-density polyethylene)

PVC-U (Polyvinyl chloride unplasticized)

PE500/PE-HMW (high density polyethylene)

PE1000/PE-UHMW (Ultra-high-molecular-weight polyethylene)

PA 6 (polyamid)

PA 66 (polyamid)

POM (polyoxymetylen, polyacetal)

PET (Polyethylene terephthalate)

PTFE (teflon)

PVDF

PEEK

PSU

PPSU

PEI

PMMA (methyl methacrylate) – acrylic

PC (Polycarbonate)

PET-G (Polyethylene terephthalate)

Adresa EN

Otevírací doba EN

Kontakty EN

Can we help you?